My Cart
Items in Cart0
Current Total$0.00
cartView Cart|Checkout


 
 
Repair the Mylar covering of Carbon Butterfly
 
Repair a torn mylar covering or mylar covering with a hole, or covering that has come loose from the airframe.
 
Transferring components from Butterfly to Carbon Butterfly
 
I would like to upgrade my old version B-fly, to the Carbon B-fly. I
do not feel that I can make component transfer without fouling it up.
If I sent in my old equipment in, would you switch it out for me?
and how much would it cost?
I also love the micro racers! The yellow jacket looks like a must
have item. So at the same time as the upgrade on the B-fly, I would
also be ordering the yellow jacket kit, and the flight pack to go
with it, and some extra batts.
 
My actuator moves one way, but not the other way
 
Stretching HingeAct hinge and checking for friction and mechanical binding of the control surface is an important step in your pre flight checkout.
 
HingeAct Repair and Replacement on Carbon Butterfly
 
My actuator is dead - how can I repair or replace it on my model?
 
Replace the Propeller on a GB05 gearbox
 
The prop on my Zero broke. The nylon post on the large gear which it was attached to snapped clean off. What to do?
 
Throttle cuts off with vibration
 
I sync up fine, when the model is throttled up or is shaken, the battery seems to lose it’s connection, Throttle cuts out, and the receiver starts up again, I can hear the tones - what’s happening?
 
How to change props on GB05 gearbox
 
The prop adapter is glued onto the GB05 - if you want to experiment and change propellers, you need to know how to remove and install the carbon prop.
 
HingeAct - Centering this magnetic actuator
 
Does the HingeAct require Magnetic centering magnets? The answer is no - the HingeAct is centered by the spring force of the plastic hinge tape itself. Also some instructions on how to center your rudder control surface that is using a HingeAct.
 
Covering Carbon Airframes with Mylar
 
How to cover the Carbon Butterfly Wing with Mylar.