0.38g 2 Channel Receiver - Connection Diagram

The Connections on the 2 channel Butterfly receiver are clearly labeled on the back of the receiver, But sometimes the installation hides them. So here is an image of the back of the receiver that should help you should you need to reconnect a wire at some point.

The Rudder and antenna connection are right next to each other. The Rudder Connections are the larger Rectangular pads in the lower left corner of receiver in this image. The antenna is the smaller round pad with the word "ANT ->" pointing to it.

The motor connections are opposite the rudder, in the lower right in this image. These are labeled " + and - "

These pads are duplicated on the other side of the receiver too!