Instructional & Technique Videos

How To Strip Magnet Wire 46AWG Stripping and Tinning magnet wire in one step. How to Glue your Prop onto the GB05 with Prop Adapter Video showing how to glue your prop onto the GB05 gearbox on a Butterfly, Carbon Butterfly, Classroom Fighter, MicroMAV and any model that is using Carbon Fiber Propeller, Prop Adapter, and GB05 gearbox. As requested from RCgroups. Butterfly Setup Video (from CDROM) This is a lower rez version of the CDROM video instructions that come with the Butterfly RTF. How to make thrustline adjustments, repair a broken spar, align the airframe, re-attach a propeller, and more Micro Butterfly Trimming and Adjustment How to adjust the foam wings of the Micro Butterfly RC Model. Adjust the Thrustline. How to make the model fly slower etc. How to Solder magnets wires, antennas,motor wires etc. How to solder ultra fine magnet wires to Plantraco Micro9 receivers. How to solder motor leads. How to solder antenna to Micro9 receivers How to Remove prop adapter from GB05 gearbox How to remove the carbon fiber prop and adapter from the GB05 using side cutters. Also shows how to install the prop. Hingeact Stretch the hinge How to adjust the rudder that uses a hingeact to center on it's own. This is done by stretching the hinge tape a little bit. Don't stretch too far though. Kolibri Pocket Plane - Setup in 1 minute Setup the Kolibri Pocket Plane in about a minute! This portable indoor rc plane fits in your breast pocket and will enable you to enjoy relaxing R/C flying anywhere! Another great flyer from Plantraco!