My Cart
Items in Cart0
Current Total$0.00
cartView Cart|Checkout



PLUG-N-PLAY ALL THE WAY

Bookmark and Share
Components that you Need

Weight, Reliability, Ease of Use. That's the reason you want Plantraco components on your Micro R/C Model. Let's face it, there is a reason why park flyers are more popular than Micro R/C Models. it's just harder to do! Not so with Plantraco Components - we make it Easy to Succeed

These are the best Micro R/C components available. We make the difficult stuff stuff easy for you, so you are assured of success with Plantraco gear
$99.99
Was $159.99
 Buy
  

Low Weight, Relliable, and Affordable. Plantraco’s Sub Gram receivers range from 0.38g up to 0.9 grams, and they control one motor and 2 magnet actuators! The patent pending Bahoma battery connector is another weight savings - no more heavy wire connectors. It’s low weight, and it saves you even more weight as a result of it’s good design. Range of 300 feet or more is no problem, and this is with antennas that measure only a few inches! No more dangly antennas hanging from your model. Frequency change is user selectable on the transmitter - crystal changes are gone forever.

These components can be transferred between your models, and are compatible with all other Plantraco components too. The Deluxe Starter Sets are a great investment for a person who wants to get started in the Micro R/C Flying and Building hobby. RTF planes are great, but it is in building models that you will advance your skills, capabilities and enjoyment.

Here’s what you’ll get in the Deluxe Starter Set #1 - DSS-1:

Micro9 3 Channel PlugnPlay 0.9g Receiver
• Approx 0.9 gram weight
• Outputs for single motor and 2 actuators, ideal for rudder and elevator control or V-tail elevon control
• Plug and Play nanoconnector sockets for your actuators and motors - no soldering needed
• 10mm Bahoma battery terminals for quick and easy battery connections
• LED and Audible Tones to indicate status and frequency number (6 frequencies)
• Built-In Low Voltage Cutoff protects your Lithium cells from over-discharge

HFX900 Transmitter with 10mm Bahoma charger built-in
• 900Mhz ISM band USA, 868Mhz EU - FCC and CE certified
• 4 CH transmitter - Full Proportional
• 6 User Selectable frequencies
• Exponential and V-Tail mixing modes
• Built-In lipoly Bahoma charger for LP90 Bahoma cells
• Requires 4 AA cells

2 pcs of 90mAh Bahoma Lipoly Cell

2 pcs of MiniAct 1.1g magnetic actuator with nanoconnectors to plug into receiver with ease

GB04 6mm gearbox with 5.25:1 reduction and nanoconnector to plug into receiver with ease

GWS 4040 Prop with 1mm bore to fit GB03 gearbox

instruction manual

Everything you need to build up the MicroScout Kit except for some tools and glue!

Our HFX series receivers are the lightest model airplane receivers ever to be manufactured! Glitches are Gone with pure digital 900Mhz RF link. Crystal changes are gone too - you can select your channel from the transmitter at startup. LED and audible tones report battery status and frequency. Low volt detection is automatic. Antenna only needs to be a few inches, and for indoor flying a 1 inch antenna can work just fine. Several receiver models available from 0.3 gram to 0.9 grams weight. No soldering required for the 0..9 gram receiver with microconnectors. Even beginners can build sub ounce R/C model airplanes with this reliable, tiny, state-of-the-art receiver!
Magnetic actuators do the work that a conventional servo does in an R/C aircraft. We selected the proven 1.1 gram BSD MiniAct magnetic actuators for our HFX series receivers. There are many R/C airplane designs that can use these powerful and reliable actuators and the new low weight connector plug and socket system means that you won’t have to do any soldering to set up your model - just plug them into the HFX 0.9 gram receiver. You can also have fun by trying your hand at making your own magnetic actuators for next to nothing!
Fidgeting with your batteries micro connectors can be a huge inconvenience for tiny models. Instead, try Plantraco’s patent pending Bahoma connector - it is a zero force connector, and it does not add extra weight to the airplane with un-needed lengths of (heavy) wire. Bahoma stands for BAttery HOlder using MAgnets, and once you see that you can connect your battery to your airplane or charger in 1 second flat - we think you will agree that our Bahoma battery connector is the way to go for powering Micro R/C models. Bahoma really means Convenience, Safety and ultra low weight Performance! (cell included with HFX R/C Sets)

Here are some of the individual component weights and other stats that should help you in choosing the best set for your needs.

Component Specifications
Receiver Weight 0.9g



Zoom In

You don't build models, The models build you!

Getting over that initial techno-intimidation is a major deal for most guys out there. They see us flying at a hobby show, or maybe they see you flying your Micro Models, and they say to themselves 'I want to do that too!'

But Where To Start?

That was our target at Plantraco - we have produced Plug-N-Play Micro R/C components so you won't have to be soldering wires thinner than human hair on your first day! Even with all the user friendliness we added to this size of components, they still are the lightest components you can buy commercially. Sure we have another order of magnitude of lighweight R/C gear, but if you are just getting started, get the DSS 1 or DSS 2 and build some models that you are sure to succeed at.

THEN you will be ready to move to the next level, grasshopper.

Digg It!

Del.icio.us

Tell A Friend

Participate in the collaborative editorial process by Digging the stuff that you like best. As you Digg, you contribute to the popularity of any given item. You also build a history of Digging that you or your friends can view.

del.icio.us is a social bookmarking website -- the primary use of del.icio.us is to store your bookmarks online, which allows you to access the same bookmarks from any computer and add bookmarks from anywhere, too. You can also use del.icio.us to see the interesting links that your friends and other people bookmark, and share links with them in return.

Tell-A-Friend about this product. This function will open your primary email program and autofill an email to your friend, you need only fill in thier email address - No need to copy long URL's. This a also a great way to suggest a gift to Mom (:

Build The MicroScout Kit using the DSS-1. Many other plans are also available on the internet or you can convert many other freeflight models to R/C.
Once you have this set of components, the sky's the limit!

3 Pc Reamer Set

Reamers - Conical Reamers (Set of 3)

Set of 3 precision Conical Reamers (Jewellers Broaches). Swiss Quality.  More info »

$16.99
 Currently out of stock
Zap Odorless Foam Safe CA Glue

Zap-O Odorless CA Glue 1oz. - Medium

A must-have for foam model making. Safe for all hobby foams. Odorless "no more tears" formula. Medium thick, cures in 15 seconds.  More info »

$11.67
 Buy
Zap Foam Safe Kicker

Zap Foam Safe Kicker (CA Accelerator)

ZAP Foam Safe Kicker.  More info »

$6.99
 Buy
White-Microbrush-10pack.jpg

Microbrush - Superfine (White) 10 pack

We use these as "CA Dippers" - great for applying CA glue's - So good are they that we say you just gotta try them. Superfine Size, White  More info »

$1.99
 Buy
12047.jpg

Executive Retractable Hobby Knife with Pocket Clip

Executive retractable knife with pocket clip. Used for precise cutting and trimming, or for defending against Amazonian Boa Constrictors. The James Bond knife that is handy to carry around in a shirt pocket. Includes a retractable stainless blade.  More info »

$9.99
 Buy