Watch this video and learn how to install magnetic actuators. First, find the two small magnets that are included with your miniact actuator set. These magnets are used for centering. There’s no contering on the miniact at first. Bring the small magnet close to the outside of the miniact and it will attach itself. By sliding the small magnet around on the outside we can get the perfect centering that we want. Once you have the position that you want, glue it with some medium CA glue – do not use thin CA glue for this procedure. To apply the glue get a dipper and apply one drop to the magnet. Install the actuators from the top side of the wing.

Products in this Video

MicroRacers Kit - P-51 Miss America For those looking for a speedy plane with full proportional radio control of the rudder, elevator and throttle - look no more! You can fly plane in an area the size of a tennis court. And it flies in winds up to 15 MPH - our MicroRacers love the wind! One of the great aerobatic rc planes - with its fully proportional remote control it flies like it's On Rails! Flying one of these is truly electric! Order today and learn the fun of building and flying the smallest Micro R/C models.  More info » $14.99   Buy MicroRacers Kit - P-51 MissAM MicroAct Magnetic Actuator - 0.4g Plantraco MicroAct magnet actuator weight is approx 0.41 g. 16cm (approx) leads with nano-connector - plugs right into the Micro9 0.9g receiver.  More info » $15.99   Buy MicroAct Magnetic Actuator - 0.4g